Working priciple : The product is special capsule filling machine which is suitable for medium ａnd small pharmaceutical factory, hospital preparation lab, etc.
The machine has stepless transduction speed-shift, ａnd electronic automatic counter. And it automatically completes the action of position, separation, filling, locking, etc. The dosage is accurate, ａnd the operation is convenient. The overall machine is made of stainless steel, ａnd it is suitable for the capsule which is filled with powder ａnd grain. Features:
1.All outer casting of the machine including hopper, machine table, etc. ａnd are all made of stainless steel meeting G.M.P. requirements.
2. Infiniy variable speed of filling tablet with independent power ａnd fix point filling that result in accurate dosage..
3.No painting finish on the machine surface thus it can avoid that the paint strip off ａnd mix into the powder, then fill into the capsules.
4.The horizontal closing system is more efficient, safety, ａnd smoothly closes without damaging the capsules.
5.A special design allows for changing mold for different size capsules within 15 minutes easily, simply, ａnd precisely.
6.Simple structure ａnd free of malfunction, easy to maintain ａnd clean.
7.Simple operation, only one operator required, ａnd operating training can done in 10 minutes.
8.Different filling weights can be adjusted without change parts. Technical Data: | Product No. | JTJ-3 | Productivity | 6000-40000caps/h | Size of Capsule | 000#,00#,0#,1#,2#,3#,4# | Type of Filling | Powder, Granule | Total Power | 3.4KW | Net Weight | 750Kgs | Dimension | 1350X780X1650mm | Accessories | Air Compressor Vacuum Pump |
|
JTJ-3 Semi-automatic Capsule Filling Machine :Details | OPERATIONS: There are 3 stations in the JTJ-3 and they are as follows: 
THE FIRST STATION:ORIENTATION OF CAPSULE
The function of first station includes capsule feeding, aligning ａnd insertion into bores of holding ring . Also, vacuum is used for separating capsule cap ａnd body in first station. After orientation of capsule, capsule cap can stay in upper holding ring ａnd capsule body can stay in lower holding ring. 
THE SECOND STATION:POWDER FILLING
Separate the holding ring, put the lower (body) holding ring on the rotary table, pull the powder hopper over the lower (body) holding ring, then auger inside powder hopper starts to run ａnd fill powder into the capsule body. While Iower holding ring turns one cycle, push powder hopped to its original position. 
THE THIRD STATION:CAPSULE CLOSING
Put upper holding ring ａnd lower holding ring together, then take the holding ring ahead of ejector ａnd aim ejector at the bores of holding ring. Pushing the ejector under the operating table. Then using air cylinder to push ejector ａnd let it press the capsules for closing.Pull out the ejector, ａnd finally pouring the
finished capsules into container. 
JTJ-3 Semi-automatic Capsule Filling Machine:Samples | - JTJ-3 Semi- Automatic Filling Machine can use in powder , pellet & granule. Suitable any hard capsule, such as animal capsule , vegetable capsule etc.
 
|
|
|
|
Model：JTJ -3
Man：Ms.Mandy
Address：Building 2, No.10 Xiajiao East Road, Huizhou, Guangdong China
Email：13430373866@126.com
Fax：0752-2227000
Scan and follow us
Welcome to 
中文版